support75F.io|
+1 888 612 7575 (USA) or 1800 121 4575 (INDIA)
|
PRECAUTIONS
•
Do not fail to wire devices with the correct polarity, when using a shared transformer may result
in damage to any device powered.
•
Turn off the power before wiring.
•
Never connect or disconnect the wiring with the power turned on.
•
Do NOT allow live wires to touch the circuit boards.
•
Install in accordance with all state and local codes.
•
Do not assemble the front plate of the HyperStat to the back plate, when the power is ON.
|
FEATURES
•
Control of up to 3 stages of heating/cooling or fan or modulating capacity equipment.
•
Built in sequences for occupancy detection.
•
Over the air firmware updates.
•
Mounting on existing gang boxes in horizontal or vertical orientation
•
Has inbuilt sensors to monitor temperature, relative humidity, Ambient light, Occupancy, CO2,
VOC and PM2.5(optional)
•
Has up to 6 Relays for HVAC control and 3 Analog outputs for actuator control/dimming
•
The Hyper Stat can power from 24V AC/ DC supply.
•
Consumes less than 2W of power
