Sum
10
Configuration mode
In order to activate configuration mode one should first run any text editor. Then
R-Shift + Pause
key combination should be pressed
(when using a Mac keyboard equivalent
R-Shift + F19
applies). If configuration mode is successfully enabled, the appropriate text message
appears.
This is the list of available key assignments:
F1 – reset type -
software
(A2000,A3000,A4000,CD32,CDTV) or
hardware
(A600,A1200),
F2 –
R-Amiga
to
R-Alt
remapping,
F10 – displaying key codes (on/off),
F12 – displaying the configuration.
Disabling configuration mode can be achieved by additional pressing of
R-Shift + Pause
key combination (
R-Shift + F19
for Mac keyboards).
Appropriate text message confirms it.
WARNING!!!
If resetting your Amiga does not seem to have any effect – please check the reset type setting (
F1
key).
