Page 12
17.
Lay the wing down on a flat surface and use 30 minute epoxy to glue the
carbon spars in place. Place heavy books over wax paper on top of the
wing to hold the wing perfectly flat as the glue cures.
Next cut the flaperons free from the wing. Then cut a 45 degree bevel in
the leading edge of the flaperon using a ruler and a hobby knife.
Hinge the flaperon to the wing using your hinge of choice. I used 3M Satin
tape on top and bottom, running full span.
18.
Next glue the wing to the top of the fuselage using 5 minute epoxy, taking
care to make sure it is perfectly aligned with the fuselage
Glue the balsa missile rails to the wing tips using 5 minute epoxy.
