6K Products DH0602, Руководство по эксплуатации и запасным частям

Страница: 5 / 17

5
After assembling the components as shown in figure 1, position the saw bar square to the log, at the correct height
with clearance between the bar guard and the side of the largest log and weld down solidly (Fig. 4).
Hydraulic Connections
The hydraulic requirements to operate the saw are 16 to 18 gallons per minute at 2000 psi from a directional control
valve that has port A and B blocked in the neutral position. These pictures are examples of valve spool that will
work. The hydraulic valve can be manual or electric control. Figure 5 shows hose
connections for correct operation.
Fig. 4
Fig. 5