background image

 Single Outlet Remote Power Switch - 

 Setup Guide (EZ-72b) 

 Overview: 

 The ezOutlet5 (EZ-72b) is the latest of the ezOutlet family for remote network 
 management. Functions include: 

 ●   Connect device to your LAN via Ethernet cable OR via Wi-Fi 
 ●   Auto-Reset upon loss of Internet or LAN device 
 ●   Remote control to turn power to the outlet on/ off or reset. This can be done 

 through the ezDevice application or through your Cloud4UIS account on any 
 computer with an Internet connection 

 ●   Schedule outlets to be turned on/ off or reset at specified Day(s)/ Time(s) 
 ●   Manage multiple devices from the same Cloud4UIS account (including EZ-22b, 

 EZ-72b UIS-522B, and UIS-622B 

 ●   Device ‘owner’ can share device(s) with other Cloud4UIS users OR transfer 

 device ownership to other Cloud4UIS users 

 Locating your Device ID & Serial Number 

 2 

 LED Indicators 

 2 

 Setting up your Device 

 3 

 Adding EZ-72b to Cloud Service 

 3 

 Configuring your EZ-72b 

 4 

 Section 1: Configuration via ezDevice mobile application 

 4 

 Device Configuration Menu 

 5 

 Section 2: Configuration via Cloud4UIS 

 10 

 Cloud Configuration Menu 

 10 

 Section 3: Configuration via Local Web Administration Page 

 15 

 Local Web Administration Configuration Menu 

 15 

 Upgrading Firmware 

 21 

 How to Remove Users and Reset Using Power Button 

 22 

Содержание EZ-72b























Отзывы: