5G HUB BG96, Технические характеристики и Руководство пользователя

Страница: 6 / 33

6
Board Rev 2.2
Copyright © 5GHUB.US
2.2 Key Features
• Atmel ATSAMD21G18 MCU
• Quectel BG96 NB-IoT module
• External GPS antenna Connector
• External LTE antenna connector
• Supports LTE NB-IoT and Machine Type Communications (MTC)
•
Supports EGPRS
• Global Frequency Band B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28/B39 (B39 for
Cat.M1 only) for LTE and 850/900/1800/1900MHz for EGPRS
•
Supports the protocols TCP/UDP/PPP/ SSL/ TLS/ FTP(S)/ HTTP(S)/ NITZ/ PING/ MQTT
• Supports SMS
•
Supports GNSS technology (GPS, GLONASS, BeiDou/Compass, Galileo, QZSS)
•
Compact board size of 58mm x 42mm
• Nano USIM card slot
•
Arduino IDE Compatible
• Works with Windows, Linux, or Android
• Ready for smart applications and development (smart home, smart city, smart transportation,
smart metering, smart farming, smart waste management, asset tracking, location, navigation,
mapping, and timing applications). Application such as Gas Detector, Soil PH Tester, Optical
Sensor, Machinery Alarm System, Irrigation Controller, Elevator, Asset Tracking Electronics,
Person/Pet Tracking, Water/Gas Metering, Smart Parking System, Fire Hydrant, Smoke Alarm,
Trash Bin, Street Lighting
• The board can operate on an external power supply of 3.3V to 5V. The recommended
voltage is 5V.
• The board can be powered via the USB connector or with an external DC power supply.
The power source is selected automatically.
•
External DC Power supply (non-USB) can be provided from an AC-to-DC adapter (such
as a wall-wart) or battery, and can be connected using a 2.1mm center-positive plug
connected to the board's power jack, or directly to the GND and VIN pins.
•
Each of the 14 general purpose I/O pins on the board can be used for digital input or
digital output using pinMode() , digitalWrite() , and digitalRead() functions. Pins used
for PWM can be using analogWrite() function. All pins operate at 3.3 volts. Each pin can
source or sink a maximum of 10 mA and has an internal pull-up resistor (disconnected
by default) of 20-60 K ohm.
2.3 Overview Diagrams