4qd PRO-160 Series, Инструкция по эксплуатации

Страница: 4 / 16

PRO-160 V2.0 10/19 Page 4 www.4qd.co.uk
5. Auxiliary Input 1
Has the following functions.
A -
Deadman’s handle
. If this pin is connected to Gnd then the Pro-160 will
follow the active profile ramp down to zero, it will ramp up again when the
signal is removed.
B - Alternate profile . If this pin is connected to Gnd the Pro-160 will start up in
the alternate profile defined in the profile that was operating without the signal
present. This allows easy switching between any two profiles.
C - Limit 1 . If this pin is connected to Gnd then the Pro-160 will invoke the
behavior defined for this limit. This will be available in version 2.3.
D - Emergency stop . If this pin is connected to Gnd then the Pro-160 will stop
immediately. It will not start up again until the signal is removed, and the
ignition has been turned off / on.
6. Auxiliary Input 2
Has the following functions.
C - Speed
Looks for a 5V pulse for
speed sensing application.
These inputs will be live in
version 2.3.
See website for more details