Marking:
The label sewn to the inside of this garment, shows beside
the on pages 13/14 mentioned information, the following pictogram
with the number of European standard:
For more information please contact the manufacturer:
Koenigsberger Str. 6, 21244 Buchholz, Germany
www.big-arbeitsschutz.de
BIG Arbeitsschutz GmbH
16
17
Under normal predictable application conditions, this product will not
release any substances which are generally known being toxic,
carcinogenic, mutagenic, allergenic, reproduction-toxic, or otherwise
harmful.
Typ 2
(pls. note page 16)
Performance Level 1
(according to the
Knee protectors for work in kneeling
position, test methods & requirements:
with kneeprotector article 8400)
DIN EN 14404:2010 (in combination
chart on page 16)
Alte Heerstrasse 111
These instructions for use and storage were approved under the
IFA (Institut für Arbeitsschutz der DGUV)
53757 Sankt Augustin, GERMANY
certification no.: IFA 2001106 (for standard DIN EN 14404) by the
Notified Body: 0121
in the occasion of the issuance of the CE compliance certificate, as
provided by the Regulation (EU) 2016/425 for category II and III
Personal Protective Equipment.
-
from caught-in hazards in presence of moving parts
-
as safety devices in areas where there might be danger of falling
This safety garment is in accordance with the requirements of the
European Technical Standard
DIN EN 14404:2010 knee protectors within system of kneepad
-
from hazards different from the ones specified above
-
from thermal hazards (kneepad is NOT heat-resistant)
Art. 8400
, type 2 (upholster, to be fastened to the trousers legs into
bag on height of knee) are suitable to offer protection against
hardware, lying on floor, as well as prevent chronically disease (e.g.
bursitis or cartilage-defect). Already existing disease cannot be cured
by wearing this knee-protection, but hurtful effects can be limited.
Important premise for the attainment of this aim is the combination of
knee-protection with proper work-wear, equipped with appropriated
kneepad-pockets which are made for this kind of purpose.
These PPE cannot prevent body injury completely. Furthermore,
no protection is offered:
-
from fire crossing and extinguishing hazards
-
from chemical hazards (kneepad is NOT solvent-resistant)
Always observe the general instruction on page 11 - 14.
Identification:
kneepads made from polyethylene according to
EN 14404:2010, type 2, performance level 1
Performance-
Level
Level 0
Level 1
Level 2
Knee-protection is suitable for a flat surface. It provides
no protection against punctures.
Knee-protection is suitable for a flat or uneven surface. It
provides protection against puncture at a strength of
(100 + 5)N.
Knee-protection is suitable for a use on flat or uneven
surface under rough conditions. It provides protection
against punctures at a strength of (250 + 10) N.
knee protectors for work in the kneeling position
DIN EN 14404:2010
1
DIN EN 14404:2010,
Typ 2
