Digital Video Recorder
MANUAL
Note: You can stop buzzer sound by using AUDIO button which does not cancel the buzzer function
if other events occur after buzzer stop, the buzzer function works as you set.
5
6
EVENT BUZZER
Select relay On/Off and time of buzzer when an event occurs.
ㆍ OFF: No buzzer on event
ㆍ 1sec – 30 minutes: The user can select the buzzer output time from 1 sec to 30 minutes by the direction keys.
VIDEO LOSS BUZZER
Buzzer output when incoming video signal is lost.
ㆍ ON: Generate buzzer sound when the video signal is lost.
ㆍ OFF: No buzzer for the video loss.
3
4
Note
EVENT RECORD, if it is set to OFF, it doesn’t record anything. So you should be careful to set.
EVENT DISPLAY
Select the display type of the monitoring screen when an event (sensor or motion) is detected.
ㆍ NONE: No change
ㆍ SEQUENCE: The channel with the event is displayed on the full screen (Pop up),
and if event occurs on at the other channel, these channels are sequentially displayed.
ㆍ SPLIT: It displays with the split screen when an event is occurred.
EVENT RECORD
Set whether to record or not and the recording time when an event occurs.
ㆍ OFF: No record on event
ㆍ 1 Sec-30 Minutes: The user can select the recording time from 1 sec to 30 minutes by the direction keys.
2
Note: Alarm dwell time is to control time for external device. It is not built-in buzzer of the system.
The setup alarm dwell time should be more than 2 seconds at least.
Alarm out time: Set alarm relay out time
ㆍ OFF: No use (No alarm will relay out even Alarm out is On)
ㆍ Range: Selectable range is available between 1sec ~ 30 minutes.
