I. Installing the SCM Breakout
The SCM Breakout connects to the main SCM with a 16-pin Doepfer-style power cable.
First, remove the six jumpers from your SCM on the "BREAKOUT" or "JUMP/B-O" header.
Now connect the cable from the SCM Breakout to the SCM's header. When you connect the cable between the two modules,
make sure the red stripe of the cable is orientated towards bottom of both modules.
NEVER CONNECT THE SCM BREAKOUT MODULE DIRECTLY TO A POWER DISTRUBUTION BOARD
! The SCM
Breakout only connects to an SCM, and never directly to the power rails. Although it uses the same cable used for eurorack
module power connections, the SCM Breakout DOES NOT CONNECT TO THE POWER RAILS on your modular system.
Instead, it draws power from the SCM module itself (very little current is consumed).
