4ms SCM BREAKOUT PANEL
expansion module for the Shuffling Clock Multiplier
User Manual v2.0
http://www.4mspedals.com/scm.php
Features
•
Expansion module for the 4ms Shuffling Clock Multiplier:
•
CV Shuffle (jack and knob)
•
Selects which beats are “slipped” by CV Slip
•
CV Skip (jack and knob)
•
Omits certain beats in a pattern
•
CV Pulse Width (jack and knob)
•
Controls width of output pulses
•
4x Fast (jack and switch)
•
CV gate or manual switch speeds up all jacks by a factor of 4
•
Button turns 4x Fast on/off, or inverts incoming signal on jack
•
Mute (jack and button)
•
CV gate or manual switch stops any more pulses from starting
•
All pulses that have already started will end normally
•
Button turns Mute on/off, or inverts incoming signal on jack
•
Re-sync CV Trigger input jack
•
Resets beat pattern to beat one
•
Additional CV Rotate and CV Slip jacks
•
Adds to the main panel's Rotate and Slip jacks
•
8 H.P. Eurorack module
•
Connects directly to the SCM with a standard 16-pin cable (same
cable used for Eurorack/Doepfer style power connections)
•
SCM Breakout does
not
connect directly to the power rail
New features since version 1:
•
Mute and 4x Fast are LED buttons
•
Pressing Mute and 4x Fast inverts signal on jack
•
Knobs are centered straight up (12:00)
•
Rotate and Slip knobs act as attenuators to breakout jacks, and
the corresponding jacks on the main SCM module are added to
this attenuated signal.
