ASSEMBLING STEPS
EN
1
9
5
13
2
10
6
14
3
11
7
15
4
12
8
Swings arrives in 4 poles,
and 2 hanging ropes, a swing
mat for assembly.
Put 2nd pole to the sleeve,
small socket to the big socket
of the 1st tube, and connect it.
Unscrew the nut and washer
from the eyelet of bolt.
Close the velcro cover and continue
this step on the next hole.
Place the swing mat on the
fl oor, and open the 4 velcro
covers as shown.
Repeat on each side so it
folds in half like diagram shown
Insert the eyelet bolt go through the
frame pole hole.
Top looking and appearance
Insert the curved frame pole
with foam into the sleeve
opening as shown.
Connect remaining frame
poles to form a full circle.
Attach the washer and nut
to the eyelet bolt.
Assemble fi nished, and ready for swing.
Put the pole like this.
Insert the rope with rings
through the slit in velcro
Using the wrench to tighten
the nut onto the eyelet bolt.
