4IPNET WHG301, Руководство пользователя

Страница: 79 / 97

© 2008 4IPNET, INC.
74
4ipnet WHG301 User ’ s Manual
Ø
Maximum Concurrent Session for User: Include Maximum Concurrent Session for User, from 10 to
Unlimited. The concurrent sessions for each user, it can be restricted by administrator.
8
Note: For more information, please refer to Appendix E. Session Limit and Session Log .
4.2.4.2 Policy 1 ~ Policy 12
Each Policy consists of access control profiles that can be configured respectively and applied to a certain Group of
users. The clients belonging to a Service Zone will be bound by an applied Policy. In addition, a Policy can be
applied at a Group basis; a Group of users can be bound by a Policy. The same Group can be applied with different
Policies within different Service Zones.
When the type of authentication database is RADIUS, the Class-Group Mapping function will be available to allow
the administrator to assign a Group for a RADIUS class attribute; therefore, a Policy applied to this Group will be
mapped to a user Group of a RADIUS class attribute. When the type of authentication database is LDAP, the
Attribute-Group Mapping function will be available to allow the administrator to assign a Group for LDAP attribute;
therefore, a Policy applied to this Group will be mapped to a user Group of a LDAP attribute. When the type of
database is SIP, the
Group
selection function will be available to allow the administrator to assign a Group option for
all SIP clients.
Ÿ
Select Policy: Select Policy1~Policy12 to set the Firewall Profile , Specific Route Profile, Schedule Profile
and Maximum Concurrent Session .
Ÿ
Firewall Profile: Each Policy has a firewall service list and a set of firewall profile consisting of firewall rules.
Ÿ
Specific Route Profile:
The default gateway of WAN1, WAN2, or a desired IP address can be defined in a
policy. When Specific Default Route is enabled, all clients applied this policy will access the Internet through this
default gateway.
Ÿ
Schedule Profile: The Schedule table in a 7X24 format is used to control the clients
’
login time. When Schedule
is enabled, clients applied policies are only allowed to login the system at the time which is checked in the
applied policy.
Ÿ
Maximum Concurrent Sessions: Set the maximum concurrent sessions for each client.