4IPNET EAP110, Быстрое руководство по установке

Страница: 8 / 14

Quick Installation Guide
Quick Installation Guide Quick Installation Guide
Quick Installation Guide
EAP110 Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved. 4
Hardware Installation
Please follow the steps mentioned below to install the hardware of EAP110:
1. Place the EAP110 at a best location.
The best location for EAP110 is usually at the center of your wireless network.
2. Connect EAP110 to your network device.
Connect one end of the Ethernet cable to the LAN port of EAP110 and the other end of the cable to a
switch, a router or a hub. EAP110 is then connected to your existing wired LAN network.
3. There are two ways to supply power over to EAP110.
(a) Connect the DC power adapter to the EAP110 power socket.
Please only use the power adapter supplied with the EAP110 package. Using a different power
adapter may damage this system.
(b)
EAP110 is a powered device (PD) that can be powered up by PoE. Connect an IEEE
802.3af-compliant PSE device, e.g. a PoE-switch, to the LAN port of EAP110 by the Ethernet cable.
Now, the Hardware Installation is completed.
To double verify the wired connection between EAP110 and your switch/router/hub, please
check the LED status indication of these network devices.