4iiii FLiiiight, Руководство пользователя

Страница: 26 / 34

7
TROUBLESHOOTING
7.4 Alignment
Your magnet array should be level with your bike’s wheel rim. The trainer is shipped
aligned for a standard 700c road wheel or 29” MTB wheel. If you have a different wheel
size, you may need to adjust the resistance unit up or down.
Possible symptoms of misalignment:
• Magnets come into contact with wheel or tire.
• The trainer is not able to hit your resistance targets.
Alignment steps
With the bike installed in the trainer, and the trainer off, push the resistance unit over
to one side, until the magnet array touches the wheel rim. Check that the magnets are
level with the rim. If the magnet array is sitting too low (touching the tire) or too high
(partially above the wheel rim):
1. Loosen both mounting bolts and move the resistance unit lower or higher as
needed.
2. Re-tighten the mounting bolts.
3. Recheck the height.
23 Table of Contents