3.2 Description
3.3 Technical data
Machine
Limpar SP-94
Working width (cm)
90
Implement height (cm)
15.5
Travel speed (km/h)
approx. 3 km/h (depending on the charge level of the batteries)
Weight (kg)
128
Motor
24 Volts DC
3.4 Preparations for commissioning
After removing the machine from its
packaging, swing the steering arm into its
working position and fix it in place by fitting
the bolts in one of the holes in the side
connection pieces. Trapezoid tappets are
welded to the rims of the wheels.
These fit into recesses on the freewheel
mechanism. Pay attention to the direction of
the raised tyre tread!
(see illustration to the
right)
Spring
connector
Adjustment for
implement angle
Handle
Switch lever
(traction
drive)
Main unit
Charger
connection
24 V
Scraper
implement
Floor
blades
Main
electrical
switch
Safety device
(Working
current,
max. 20 A)
Bowden control cable
Height adjustment for
steering arm
View from rear
Use only the original
charger, otherwise the
batteries can be
damaged!
Steering arm
Bolt for
fastening the
steering arm