gen4-FTDI Display Series - GETTING STARTED MANUAL
|
5
CONNECTING THE DISPLAY MODULE
TO THE HOST
This section shows the complete instructions for connecting the display to
the host controller.
Hardware
Software
Connection Options
1.
Connect
one end of the FFC to your module’s 30
-way ZIF socket with
the metal contacts on the FFC facing up on the latch.
2.
Connect the other end of the FFC to the 30-way ZIF socket on the
gen4-Breakout board with the metal contacts on the FFC facing up on
the latch.
3.
Connect the pins of the gen4-Breakout to the pins of the Host
Controller.
Display Module
FFC Cable
Adaptor
Any Software which
can drive your host
controller
Host Controller
Cable
(FFC)
gen4-Breakout
Adaptor
1
1
1
2
1
3
