INDUSTRIAL VACUUM CLEANER
EN
3
TECHNICAL DATA
Operating voltage and frequency
220-240 VAC - 50/60 Hz
Power
1600 W
Power at socket (max)
2000 W, Сlass 1
Total power (max)
3600 W
Air capacity
119 m
3
/h
Vacuum level
180 hPa
Weight Brutto/Netto
15 / 12 kg
Dimensions
600 x 375 x 575 mm
Class of protection
IPX 4
Noise level EN 60704-3
73 dB (A)
Container capacity
8 L
Inlet air pressure
6 bar
Max compressed air flow
1400 L/min
GENERAL EQUIMPENT SAFETY WARNINGS
WARNING
! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
The term “equipment” on the warnings refers to your mains-operated (corded) Mobile Vacuum Cleaner.
1)
WORK AREA SAFETY
a)
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b)
Do not operate equipment in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
Equipment creates sparks which may ignite the dust or fumes.
c)
Keep children and bystanders away while operating equipment. Distractions can cause you to lose control.
2)
ELECTRICAL SAFETY
a)
Equipment plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed
(grounded) equipment. Unmodified plugs and matching outlets will reduce risk of electric shock.
b)
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is earthed or grounded.
c)
Do not expose equipment to rain or wet conditions. Water entering equipment will increase the risk of electric shock.
d)
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the equipment. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e)
When operating a equipment outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
f)
If operating equipment in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
3)
PERSONAL SAFETY
a)
Stay alert, watch what you are doing and use common sense when operating equipment. Do not use equipment while you
are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating equipment may
result in serious personal injury.
b)
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c)
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source, picking up or
carrying the equipment. Carrying equipment with your finger on the switch or energising equipment that have the switch
on invites accidents.
d)
Remove any adjusting key or wrench before turning the equipment on. A wrench or a key left attached to a rotating part of
the power tool may result in personal injury.
e)
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected
situations.
f)
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.
PICTOGRAMS
Read the following instruction
first before operating the product
Important safety indications
Caution! This appliance contains
dust hazardous to health.
Emptying and manteinance
operations, including removal of
the dust collection means, must
be carried out only by authorized
personnel wearing suitable
personal protections. Do not
operate without the full filtration
system fitted.
Содержание 9500
Страница 2: ...INDUSTRIAL VACUUM CLEANER EN 2...
