PAGE 9
1
2
2
3
3
4
SPEED MONITORING
Qty 1 - One sensor located on either
side of the tail or boot shaft.
BEARING TEMPERATURE
Qty. 4 - One sensor for the bearings
at each end of the drive and tail or
head and boot shafts.
BELT MISALIGNMENT
Qty. 4 - Sensors work in pairs, one
for each side of the belt on the drive
and tail or head and boot sections.
PLUG INDICATION
Qty. 1 - One sensor located near the
top of the drive section or spouting
by the discharge.
1
2
3
4
TYPICAL SENSOR PLACEMENT
FOR BUCKET ELEVATORS