4B Binswitch BS1V3FC, Руководство по эксплуатации, Страница: 6 / 12

PRODUCT OVERVIEW
The Binswitch Sensor detects level or plug situations for bulk granular solids or liquids in tanks, bins, or
silos and can be used as a plug or choke detector in chutes, conveyors and elevator legs. A two color LED
shows material present or absent.
All models have a polycarbonate housing that is corrosion and abrasion resistant, dust-tight, and waterproof.
SPECIFICATIONS
Model Power Supply - 12 VDC (BS1V3FC) / 24 VDC (BS1V4FC) / 110 to 240 VAC (BS1V6FC)
Supply Tolerance - -15% to +10%
Power Consumption - 30 mA
Fuse - 5 amp maximum
Operating Temperature - -13°F (-25°C) to 158°F (70°C)
Sensing Range - 1” (25 mm) typical
Output - Voltage free relay: 1 pole normally open, 1 pole normally closed
Contact Rating - 3 amp, 240 VAC, non-inductive
Fail Safe - Relay reverts to de-energized state on power failure
Calibration Control - Screw potentiometer (Bin must be empty when calibrating)
LED Indication - Red on - material absent , Red off - material present
Cable - 6 ft. (2 m) - 5 x 20 AWG conductors
Enclosure - Nylon
Weight - 10.5 ounces
Protection - IP67 - NEMA 6 and 6P (dust tight and water resistant)
Approvals -
CSA Class II Division 1 Groups E, F and G (USA & Canada)
GOST-R (Russia)
ATEX & CE Versions Available (Europe)
DIMENSIONS
PAGE 6
6-1/8”
155 mm
1-3/16”
30 mm
M30 x 1.5 x 10 mm Threads
LED
Calibration
Control
Screw
6 ft. (2 mm) Cable
5 x 20 AWG Conductors
6.2 mm Overall Jacket Diameter