www.4-Max.co.uk
Tel: 01256 782 512
As you have purchased this model we assume you’re are a competent flyer and are familiar with
this.
Centre of Gravity
Start with the CG at 60mm from the leading edge of the wing.
As you get more used to it or if you are a very experienced 3D pilot then the CG can be moved
back as far as 80mm from the leading edge.
We highly recommend you move the CG back in small increments until you are happy with its
flight performance.
Initial Suggested control throws
These are initial suggested movements.
You can increase or modify these as you get more comfortable flying this model
Measurements taken at the widest part of the moving surface
Elevator:
+20mm, -20mm, 30% Exponential
Aileron:
+20mm, -20mm, 30% Exponential
Rudder:
+30mm, -30mm, 30% Exponential
Don’t forget to range test your model as per the radio manufacturer’s instructions.
We hope you have enjoyed assembling this model and may your take off’s equal your landings.
