Page 23 of 28
SQ-Series Operation Manual REV01 1120
9.) SYSTEM SETUP
Channel A (Sub)
Channel B (Sub)
Audio Source
Stereo Mode
LPF Mode
1+
1-
2-
2+
CH B (SUB)
2 Wire Cable
(1+/1-)
1+
1-
2-
2+
CH A (SUB)
2 Wire Cable
(1+/1-)
9.7) Stereo Subwoofer Setup With Build In Crossover
(SQ-1604, SQ-2404, SQ-3204)
Stereo system setup with two subwoofer using the build in LPF 100Hz/12dB Filter crossover.
Maintain proper polarity (+/–) on output and input connectors. Use Class 2 output wiring.
IMPORTANT: Turn off the amplifier and unplug its power cord.
INPUTS:
Connect analog input wiring for all channels.
CHA right Sub signal
CHD left Sub signal
OUTPUTS:
Spkn output configuration figure 9.8
Plug the two-wire Spkn cables to the two subwoofers input sockets and to the CHA (CHB) output
socket of the amplifier.
The wiring is:
1+/1-
SWITCHES:
Select the input sensitivity accordingly your audio source or mixer.
Select the Input Mode to Stereo.
Select the LPF Mode to LPF.
Figure 9.8
Содержание Pro Audio SQ Series
Страница 2: ......