V-Series Camera Quick Start Guide |
VX-3V-ID-RIAWD
12000 Pecos St., Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
6
Figure 1-6
Install the Adapter Plate
Align the mounting base with the adapter plate and rotate the mounting base counter-clockwise to
affix it to the adapter plate, and then secure it by tightening the lock screw.
Figure 1-7
Install the Mounting Base
Adjust the surveillance angle according to the figure below. Panning angle [0~80°], tilting angle
[0~355°], and azimuth angle of the lens [0~355°].
Figure 1-8
3-axis Adjustment
Zoom and Focus Adjustment
: Cameras of this series are equipped with a motor-driven lens. You can
adjust the zoom and focus level on PTZ control panel by visiting the camera via web browser or client
software. See Section 2 for information on identifying and setting up the camera on your network
Please reference the VIGIL Client User Guide or the 3xLOGIc VISIX V-Series Gen II User Manual for
information on adjusting zoom and focus from VIGIL Client or from the camera browser interface
respectively.
Lock
Screw
0~80°
0~355°
0~355°