www.3xlogic.com
Quick Start Guide
p.
4
4 Mounting
The unit can be mounted to the wall or ceiling.
4.1 Ceiling Mount
When mounting to ceiling, utilize the two holes on the back of the unit and secure
to a standard single-gang electrical box.
4.2 Wall Mount
When mounting to the wall, it is recommended using the corner mounting bracket
provided in the box. However, the unit may be installed on a flat wall with the
understanding the sensor has a 160° detection area.
Figure 1-2: Corner Mount Bracket
1. Install the unit onto the mounting bracket before placing bracket on the wall.
2. Install two mounting screws in the wall. Leave .25 inches of screw shaft to
slide the mounting bracket onto.
5 Testing
The S1 can be put into test mode 2 ways:
Utilizing a magnet placed under the sensor hole on the front of the unit.
Utilizing the TSTU device (Part # STU01, sold separately).