3Ware 9650SE-4LPME, Руководство по установке

Страница: 23 / 50

Step 3. Connect the Cables
www.3ware.com 19
Step 3. Connect the Cables
Two cables are used to connect the 3ware Sidecar to your computer:
the Multi-lane SATA II cable, and the chassis control cable.
1
Connect the Multi-lane SATA II (Serial ATA) cable.
On the back of your computer, connect one end of the Multi-
lane SATA cable to the RAID controller port.
When the cable is inserted correctly, it will click into place.
Connect the other end to the port on the 3ware Sidecar.
2
Connect the Chassis Control cable.
On the back of your computer, connect one end of the Chassis
Control cable to the round port on the RAID controller.
Connect the other end to the port on the 3ware Sidecar.
The ends of the cable are keyed to help insure correct insertion.
Figure 9. Cables Connected to the Controller in the computer,
and to the 3ware Sidecar
Note:
For both cables, the correct cable orientation is reversed on
the computer from the orientation used on the 3ware Sidecar. The
illustrations below show the correct orientation.
Back of Computer
Back of Sidecar