background image

3W 85i Engine Manual

more infos: www.3w-modellmotoren.de

 Flipping the prop with your hand or fingers can lead to serious accidents! Always use a

rubber stick to start the engine!

 Not having the plane secure can be lead to serious accidents. Depending on its size use

one, two, or more helpers to secure your model. Always tell your helpers to be ready for

the model to start at full power. Remember, these engines have a high power output.

 Do not put your finger(s), any items, or any other parts of the body into the rotating propeller.

 Never tune the carburetor whilst engine is running! Stop the engine. Tune the carburetor

and start the engine again. Repeat this procedure until the carburetor is properly tuned.

 Make sure that no gasoline will be splashed into the hot muffler(s).

 Only 3W mufflers, or mufflers authorized by 3W with an acceptance (test) number, should

be used.

 Only 3W-ignition systems should be used for proper operation.

Important:

Using unauthorized products or failing to follow the instructions in this manual will void your

warranty immediately.

Pilots check list

We strongly recommend checking the following agenda for your own safety before starting!

 Check the propeller bolts for tightness

 Check that the spinner is firmly attached

 Check the propeller for possible damage

 Check to be sure you have the throttle position at idle

 Check all batteries

 Check servo functions

 Check to see that the ignition switch is OFF

 Check pressure (6-8 bar) system of retract (if applicable)

 Check all linkages for play

 Check your wheels for possible damage and easy running

 Check the wing mounting for tight fit and proper attachment

 Check the canopy for tight fit and proper attachment

 When starting the engine one person (minimum) has to hold the model

Содержание 78B2


















Отзывы: