3Svision N9071, Руководство пользователя

Страница: 53 / 116

N9071
Mini Dome Network Camera 2 Meg H.264
- 53 -
PPPoE Setting (Dial-up Networking Setting)
Point-to-Point Protocol over Ethernet is a protocol that supports access to a high-speed
wideband network using a PC and a wideband modem (such as xDSL, Cable, Wireless
modem). The user need only to equip the PC with an Ethernet card and apply to an ISP
and an ADSL provider (such as Chunghwa Telecom) for ADSL service to roam the
Internet through ordinary twisted copper wires.
PPPoE setting must be executed in the LAN environment for your PC to connect to ADSL.
Follow the steps below to complete the setting:
1. Dial: You can select whether or not to dial when you boot the machine.
2. Use DHCP or fixed IP for connection to the LAN environment.
3. Key in the IP address of the camera and enter "PPPoE Setting" following the route
Setting

Basic Setting

Network

PPPoE.
4. Key in the xDSL "Username" and "Password" acquired from your ISP. Click Save to
confirm the setting.
5. Where the ADSL modem and the camera is connected via a switch-hub, you can
press “Reboot” or restart the machine manually to try PPPoE dialing when the setting
of the camera has been completed.
6. A different IP address is obtained after each dial-up network connection. You can get
the new IP address from Setting

Basic Settings

System. If you want to know the
new IP address anytime, you must enter Setting

Basic Settings

Notification to
set some settings. There are three ways to get information: 1. SMTP 2. FTP 3. HTTP.
For details, refer to the Notification Setup Menu.
NOTE
：
You can use the DDNS function to access the camera. Refer to the DDNS Setting for
more information