11
Effects Insert (28)
The EFFECTS INSERT is designed to allow you to insert an effects device (most often, time-based
effects like delay or reverb) after the preamp and before the power amp. When no effects device is
present, this circuit is completely bypassed to deliver a direct signal path between the preamp and
power amp stage. For best results, utilize professional type effects processors with at least +15dBu
input sensitivity.
OPERATION NOTES:
• This is a line-level effects insert that is best suited for professional rack-mount effects devices
capable of handling up to 4.5Vrms.
• Best performance is achieved by minimizing patch cable length.
• When cable runs are over 5 - 10 feet it may be beneficial to use an external effects buffer device
on the SEND connection.
Back Panel:
160--
28
