― 5 ―
3.
Set up
3.1
Charging
Please charge the ‘Viewter’ Microscope before use it. Use attached USB charging cable
and AC/USB adaptor to connect ‘Viewter’ to household wall outlet. Charging lamp will
be red during charging period. Charging time will be approx 4~5 hours. Charging lamp
will be blue when charging is complete.
※
Please charge battery until full power before first use
※
We do not recommend you use it and charge it at same time or it will shorten battery
life
3.2 Insert SD card
Images captured by Viewter will be saved in SD card. Please insert SD card into SD/SDHC
card slot as a image on next page. Maximum usable size of SD is 32GB.
※ If you use MicroSD/SDHC card, please make sure that MicroSD/SDHC card
is set in adaptor correctly.
※ If the card could not be read properly, please remove the card and set
it again.
Charging port
Charging lamp
Содержание Anyty 3R-VIEWTER-500UV
Страница 38: ...37...