3Q 3Q-MG-F22, Инструкция по эксплуатации

Страница: 5 / 7

Manual Control : The massager speed and direction
can also be manually controlled by clicking on the
“Manual Settings” button then clicking either
“Speed” or “Direction” to adjust the speed and direction.
(Figure 3)
Using the Massager
(Figure 3)
To Start

Connect the massager to a properly grounded wall outlet.

Press the power button to turn the machine on. Then the massager begin to work on
Auto mode at default massage program P1.
 Choose auto program P2, P3 or P4 by pressing the Auto Button.

Choose personalized programs, press the Manual button.

The Vibration and Heating can be used for any modes.
Its default massage program is P1. And the massager is programmed to run for 15 minutes.
Auto Mode

Simply press the Auto button to choose programs, from P1 to P4. Each program lasts for 15
minutes. You’ll hear an alert sound when you choose different programs (from P1 to P4).

Its pre-set massage time is 15 minutes for each program you choose (P1 to P4).
Manual Mode

The Manual button is just like a switch for you to turn on the Speed and Direction function.

The "Speed" and "Direction" function can be used only after you choose "Manual" button.

After you press the Manual button, you can then press Speed and Direction to choose
massage speed intensity and massaging directions for moving clockwise or anti-clockwise.
* You can focus on foot reflex zone’s massage in a period of time when massage acid, up, pain
and other sensory areas.
⇦