The rack supports 2 power supply modules
optional, single and dual power supply optional. As
for dual power supply device, if one power supply
fails, it will immediately switch to another power
supply, ensuring uninterrupted power supply of the device.
Power supply input range: 100~250VAC.
DC power supply input
The rack supports 2 power supply modules
optional, single and dual power supply
optional. DC power supply adopts 2 terminal
blocks, power supply input: -48VDC. The pin definition as
follows:
Pin NO.
1
2
Pin definition
-48VDC+
-48VDC-
Note:
Power ON operation: First insert the power supply
terminal block into the device power supply
interface,
and then plug the power supply plug contact and power
on.
Power OFF operation: first unpin the power plug, and
then remove the terminal block wiring part, please note
the operation order above.
【
Indicator
】
The device provides LED indicators to monitor the device
operating
status,
comprehensively
simplifying
the
troubleshooting, each indicator's detailed status as the table
below:
LED
Status
Description
POWER
(1-2)
ON
Power supply is operating
normally
OFF
Power supply is disconnected or
abnormal
【
Specifications
】
Panel
Card slot
16 daughter card slots, 2 power
supply module slots
Indicator
Power supply indicator
Power supply
Input power supply
100~250VAC or -48VDC
optional
Output power supply
5.7VDC
Consumption
Full-load consumption
≤
50W
Environment Limits
Operating temperature
0~55
℃
Storage temperature
-20~75
℃
Operating humidity
5%~95% (no condensation)
