2.
Copper port connection status indicator (TPLNK)
3.
Copper port duplex mode indicator (DUP)
4.
Power supply connection status indicator (PWR)
5.
Gigabit fiber port
6.
Fiber port connection status indicator (FXLNK)
7.
Gigabit copper port
8.
Copper port 100M speed indicator (100M)
9.
Copper port Gigabit speed indicator (1000M)
10.
Screw
11.
Power
【
Mounting Dimension
】
Unit: mm
Rack
100M Media Converter Rack Card
Gigabit Media Converter Rack Card
Notice Before Mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
【
Rack-mounted
】
Select the device mounting location to ensure
enough size.
Put the device on the plane plate of the rack, and
install the left and right lugs on the rack with 4
screws.
Check and confirm the product is mounted firmly on
the rack, mounting ends.
【
Disassembling Device
】
Device power off.
Unscrew the fixed mounting lug screw on the rack.
Shift out the device from rack, disassembling ends.
【
Power Supply Connection
】
Rack AC power supply
The rack has built-in professional communication power
supply, which supports dual power supply redundancy. When
one of the power supplies fails, it could switch to another one
immediately to ensure the device power supply is not
interrupted. Power supply range: 85
～
265VAC.
This product also supports 48VDC power supply input. The
DC products have the same performance parameters except for
different power inputs.
Rack card DC power supply
The rack card obtains power supply via rack, the power supply
is 5 VDC
【
Indicator
】
100M Media Converter Rack Card
Category LED
Indicate
Description
Fiber port
FPL
ON
The connection of fiber
port link is great
Blinking
It
exists
data
transmission
OFF
The fiber port link is
down
FRX
ON
Full duplex mode
Blinking
It exists conflicts
OFF
Half duplex mode
Copper
Port
TRX
ON
Full duplex mode
Blinking
It exists conflicts
OFF
Half duplex mode
10/100
ON
100Mbps
