- 2 -
1. Ground screw
2. Power input terminal block (3 bits)
3. DIP switches
4. DIN-Rail mounting kit
5. Power indicator
6. PoE state indicator
7. System running indicator
8. Link/ACT indicator
9. 10/100M Base-T(x) PoE port
10. 10/100M Base-T(x) port
11. 100M Base-FX optic fiber port
【
Power supply input
】
The product top panel provided 3 bit power supply input terminal
block, support DC input. Voltage input (1, 3) range is 45
～
55VDC. The power supports reverse polarity protection.
【
Dimension
】
The series of products are the same size, and the type of the
Ethernet interface is different. Unit (mm)
IPS215-4POE
IPS215-F-4POE
【
DIP Switch
】
Top panel provided 4 bits DIP switch to do function configure
(ON to enable effective). 1 is RJ45 port support pause frame flow
control and the optic fiber port support back press flow control. 2
is force mode (RJ45 10M), but optic fiber port speed unchanged.
3 is VLAN function that port 5 with port 1-4 can communication,
but between ports 1 to port 4 cannot communication. 4 is keeping
for future function. Please power off and power on when you
change the status of DIP switch.
【
Communication connector
】
10/100BaseT(X) Ethernet port
The pinout define of RJ45 port display as below, connect by UTP
or STP. The connect distance is no more than 100m. 100Mbps is
used 120
Ω
of UTP 5, 10Mbps is used 120
Ω
of UTP 3 ,4, 5.
RJ45 port support automatic MDI/MDI-X operation. can
connect the PC, Server, Converter and HUB .Pin 1,2,3,6
Corresponding connection in MDI. 1→3,
2→6,
3→1,
6→2 are
used as cross wiring in the MDI-X port of Converter and HUB.
10Base-T/100Base-TX are used in MDI/MDI-X, the define of Pin
in the table as below.
NO.
MDI signal MDI-X signal
1
TX+
RX+
2
TX-
RX-
3
RX+
TX+
6
RX-
TX-
4, 5, 7, 8
—
—
Note: “TX
±
” Transmit Data
±
, “RX
±
” Receive Data
±
, “
—
” Not use.
10/100Base-T(X) MDI (straight-through cable)
10/100Base-T(X) MDI-X (Cross over cable)
MDI/MDI-X auto connection makes switch easy to use for
customers without considering the type of network cable.
100Base-FX Fiber port
1
8
