Click “Login” button to login to the WEB interface of
Step 4
the device.
Note:
The default IP address of the device is “192.168.1.254”.
The default user name and password of the device are
“admin”.
If the username or password is lost, user can restore it to
factory settings via device DIP switch or management
software; all modified configurations will be cleared
after restoring to factory settings, so please backup
configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【
Specification
】
Panel
Gigabit SFP
1000Base- X, SFP slot
Gigabit copper port
10/100/1000Base-T(X)
self-adapting RJ45 port, half/full
duplex self-adaption or forced
working mode, support MDI/
MDI-X self-adaption
Console port
CLI command management
port (RS-232), RJ45
Alarm interface
2-pin 7.62mm pitch terminal
block, support 1 relay alarm
output
Indicator
Power supply indicator, run
indicator, interface indicator,
alarm indicator
Switch Property
Backplane bandwidth
56G
Packet buffer size
16Mbit
MAC Address Table
12K
Power supply
Input power supply
12
～
48VDC
Support dual power supply
redundancy and non-polarity
Support built-in 4.0A
overcurrent protection
Access terminal block
4-pin 7.62mm pitch terminal
blocks
Power Consumption
No-load
10.99W@24VDC
Full-load
20.69W@24VDC
Working Environment
Working temperature
-40
℃
～
75
℃
Storage temperature
-40
℃
～
75
℃
Working humidity
5%
～
95% (no condensation)
Protection grade
IP40 (metal shell)
