LED
Indicate
Description
OFF
PWR is disconnected or running
abnormally
RUN
Blinking
The system is running normally
OFF
The system is not running or
running abnormally
ON
System is running abnormally
ALM
ON
Power supply or port link has
alarm
OFF
Power supply and port link have
no alarm
Link(G1
-G28)
ON
Port has established valid
network connection
Blinking
Port is in a network
communication status
OFF
Port hasn’t established valid
network connection.
【
Logging in to WEB Interface
】
This device supports WEB management and configuration.
Computer can access the device via Ethernet interface. The
way of logging in to device’s configuration interface via IE
browser is shown as below:
Step 1
Configure the IP addresses of computer and the
device to the same network segment, and the
network between them can be mutually accessed
Step 2
Enter device’s IP address in the address bar of
the computer browser.
Step 3
Enter device’s username and password in the
login window as shown below.
Step 4
Click “Login” button to login to the WEB interface
of the device.
Note:
The default IP address of the device is
“192.168.1.254”.
The default username and password of the device are
“admin123”.
If the user name or password is lost, user can restore it
to factory settings via restoring factory setting button
or management software; all modified configurations
will be cleared after restoring to factory settings, so
please backup configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【
Specification
】
Panel
Gigabit SFP
1000Base- X, SFP slot
1000M Combo port
10/100/1000Base-T(X) RJ45
or 100/1000 Base-SFP
interface (optional)
Gigabit copper port
10/100/1000Base-T(X)
self-adapting RJ45 port,
half/full duplex self-adaption or
forced working mode, support
MDI/ MDI-X self-adaption
Console port
CLI command management
port (RS-232), RJ45
Alarm interface
5-pin 5.08mm pitch terminal
block (R+/R-), support 2 relay
alarm information outputs
Indicator
Power indicator, system alarm
indicator, device running
status indicator, interface
connection/running status
indicator
Switch Property
Backplane bandwidth
56G
Packet buffer size
12Mbit
MAC table size
16K
Power Supply
Input power supply
Model I: 220VAC
(100~240VAC/DC) dual power
supply
Model II: 48VDC (36~72VDC)
dual power supply
Model III: 24VDC (18~72VDC)
dual power supply
Access terminal block
AC product supports
single-phase socket with
rocker switch
DC product supports 5-pin
5.08mm pitch terminal blocks
Power Consumption
Model I
No-load: 10.5W@220VAC
Full-load: 25.3W@220VAC
Working Environment
Working temperature
-40~75
℃
Storage temperature
-40~85
℃
Working humidity
5%
～
95% (no condensation)
Protection grade
IP30(metal shell)