Note: Generally, switches with 8 ports or more ports can
be mounted in a standard 19-inch equipment rack defined
by Electronic Industries Association(EIA).
1)
Please first attach the two L-shaped brackets to the
device sides, using the screws provided in the bracket
mounting kit.
2)
Mount the device in the rack, using rack mounting
screws( not provided).
Making power connection
POE switches is designed for AC 90
～
264V/50
～
60Hz Power
Supply. We advise to adopt a one-phase 3-wire power socket with
neutral point joint or multifunctional computer power socket.
Please make sure there are no problems on power supply,
connection and grounding before you start operating the POE
devices, or the devices will get damaged.
Connecting Instruction
：
1)
Connect one end of power cord into the AC power
socket of POE device rear panel, and then connect the
other end to the external AC power supply socket.
2)
Check the “Power” indicator on the POE device front
panel, the LED will be on if successfully connected.
【
Specification
】
Technology:
Standard and Protocols:
IEEE 802.3af
，
Power Over Ethernet
、
IEEE 802.3at
，
Power Over Ethernet Plus
IEEE 802.3u
，
100BASE-TX
、
IEEE 802.3ab
，
1000 BASE-T
、
IEEE
802.3x
，
Full-Duplex Flow Control
、
IEEE 802.3az
，
EEE(Energy
Efficient Ethernet)
POE Standard: IEEE802.3af/at
Port Flow control
：
Back-pressure traffic control under Half-Duplex
mode
，
IEEE 802.3x traffic control under Full-Duplex mode
Interface:
RJ45: 10 /100/1000Base-TX auto speed control, Half/full duplex
and MDI/MDI-X auto detect
PoE Pin-out: 1/2(+)
，
3/6(-)
；
Customized 4/5(+),7/8(-)
Exchange Properties:
100M forwarding rate: 1488095pps
100M forwarding rate: 148809pps
10M forwarding rate
：
14880pps
Transmit type: Full wire-speed storage and forwarding
MAC address: 8K
，
Support auto-update, two-way learning
Switching Capacity
：
≥16Gbps
Spanning Tree: Spanning Tree Protocol
Rapid Spanning Tree Protocol(RSTP)
Port Flow Control: Back-pressure traffic control under Half-Duplex
mode ,IEEE 802.3x traffic control under Full-Duplex mode
Port Rate Restriction: Port-based ingress or egress rate limiting
Jumbo Frame: Maximum support 9216Byte
Indicator light:
Interface light: Link/Act
，
POE Status
Power light: PWR
Power:
Input Power Supply: 90
～
264VAC/50
～
60Hz/150W
Working Environment:
Working Temperature: -20~50°C
Storage Temperature: -40~70°C
Operation Humidity:10%
～
90%(
non-condensing)
Storage Humidity:5%
～
95%(
non-condensing)
Mechanical Properties:
Weight: <1.5Kg
Dimensions
（
L×W×H
）
:280×180×44mm
Energy Saving:
Comply with “EEE” Energy Efficient Ethernet
Warranty:
Warranty time: 3 years
