3nStar SC440, Руководство по установке

Страница: 12 / 28

Disable (*) Enable
*Remarks:
Disable:
New data need to wait after all data is upload completely.
Enable:
New data will be saved in the cache and send to devices automatically, so no need to wait all data transfer completely, this
is to support continuous scanning.
8.
Bluetooth Setting
8.1 Bluetooth HID Mode
Bluetooth HID Mode
*Remarks:
Scan this bar-code above to enter the“Bluetooth HID Mode”and it will connect the Bluetooth which is matched last time
automatically by default.
If not in broadcast state and need to pair the Bluetooth, please check below for more details.
8.2 Bluetooth HID Pairing
Bluetooth HID Pairing
1. 2 ways to enter “Bluetooth HID Pairing” mode:
(1) Scan the “Bluetooth HID Pairing” code, search for “Bluetooth” through the Bluetooth device.
(2)
Pressing the button and hold for about 8 seconds, there will be a sound, then release the button.
2. Exit “Bluetooth HID Pairing” mode:
(1) When Bluetooth is matched, it will prompt once and ending pairing.