3nStar SC400, Руководство по программированию

Страница: 59 / 73

64
7
.
1 Appendix 1
:
Factory Defaults Table
Parameter Facto ry Default Remark
Progr amm ing Bar code
Barcode Programming Enable
Programming Barcode Data Enable
Comm unicati on Setti ngs
Interface USB HID - KBW
Options : TTL - 232 , USB HID - KBW ,
USB COM Port Emulation
TTL - 232
Baud Rate 115200
Parity Check None
Data Bit 8
Stop Bit 1
Hardware Flow Control No flow control
HID - KBW
USB Country Keyboard Type U . S .
Convert Case No conversion
Scan Mode
Scan Mode Trigger mode
Options : Trigger mode , Sense
mode , Continuous mode .
Trigger Mode
Decode Session Timeout 3000ms Applicable to all three scan modes .
Trigger Condition Electric level
Auto Sleep Enabled
Time Period from Idle to Sleep 500ms
Sense Mode
Decode Session Timeout 3000ms Applicable to all three scan modes .
Image Stabilization Timeout 500ms
Operation after Good Decode Pause after good decode
Timeout between Decodes
( Same Barcode )
Disabled
1500ms
Threshold Value of Illumination Change 2
7
、
Appendix