3nStar SC050 Скачать руководство пользователя страница 34

Страница: 34 / 113

4.4 Trigger mode & Continuous

read mode

Data format:

Length Message

Source

Message

target

Reserve Opcode Command beeper Check

Sum

0x0B

0x04

0x31

0x00

0x50

1)Trigger mode & reading mode

Command:

SET

*Single read

F0000

Continuous read

F0001

Disable repeat read

F0100

*Enable repeat read

F0101

Multiple read

F0102

END

Note:

1. Trigger mode:

Single read: When a bar code has been decoded, the reader will be turned off. The

reader must be triggered again to read another label. It can be triggered via button, serial
port or auto trigger.

Continuous read: The reader will produce as much data as it can decode regardless

whether it is the same or not. This mode is mainly used for demonstration and diagnosis.

2. Read mode:

Disable repeat read: Disable continue to read the same barcode.

Enable repeat read: Enable continue to read the same barcode.

Multiple read: The same label can only be decoded again after the label has not

been detected for a number of scans. This mode can only be programmed in Continuous
read trigger mode.

Содержание SC050


















































































































Результаты поиска

Содержание SC050

Отзывы:

3nStar SC050, Руководство по программированию, Страница: 34 / 113

Результаты поиска

Содержание SC050

Отзывы: