3nStar SC050, Техническое руководство

Страница: 46 / 78

44
4.14.6 CODE 93
Code 93 is a variable length symbology with 2 mandatory check digits and non
printable start/stop characters. The following characters are supported: the digit 0 up
to 9; the upper case characters A up to Z; the characters “-”, “$”, “%”, “/”, “.”, “+”,
SPACE; 4 non printable shift characters.
The first check digit (C) is the modulo 47 sum of the weighted data character values.
The second check digit (K) is the modulo 47 sum of the weighted data character
values including the first check digit (C). The check digits are not transmitted.
The special shift characters are control characters and are not transmitted with the data.
If one of these characters is followed by an upper case character “A” up to “Z”, it is
transmitted as 1 single character. In case of an invalid combination, the label is
rejected. This method enables support for full 128 ASCII characters encodation. The
encodation is compatible with the Code 39 “$”, “%”, “/” and “+” characters.
Command:
%
SET
Disable
IG000
*Enable IG001
*Not Transmit CD IG100
Transmit CD IG101
*Min barcode length IG801
*Max barcode length IG980
%
END