![background image](http://html1.mh-extra.com/html/3nstar/ltt204/ltt204_user-manual_3171101034.webp)
34
problems
possible factors
solution
- Print position is incorrect when
printing small volume label
* Label sensor setting is
incorrect
* label size setting is
incorrect
* The vertical displacement
(vertical offset) in the printer
driver's label style is not set
correctly.
* Recalibrate label sensors
* Set the correct size of the volume label and
the clearance size of the volume label
*If BarTender software is used, set the
vertical offset (vertical offset) in the printer
driver.
- Print content on the left and/or
right sides is missing
* Incorrect label size setting
* Set the correct label size
- When the printer is restarted, the
RTC time is incorrect
* Battery dead
* Please replace the battery on the
motherboard
- Wrinkle problem
* Pressure of print head is
uneven
* Ribbon is not installed
correctly
*The label paper is not
installed correctly
*Incorrect print density
* label paper feeds
incorrectly
* Please go to the next chapter for the
adjustment of uneven pressure on the print
head.
* Set the density to adjust print quality.
* Adjust the label width adjuster to fit the
label width.
- Black label paper with gray lines
* There is dirt on the print
head
* There is dirt on rubber
roller
* Clean print head
* Clean rubber roller
- Prints unsteadily
* The printer is in Hex Dump
mode
* Serial line (RS-232) setting
is incorrect
* Turn the printer off again and exit out of the
dump mode
*Reset the RS-232
Содержание LTT204
Страница 1: ...THERMAL TRANSFER LABEL PRINTER USER MANUAL LTT204...
Страница 17: ...17 Ribbon installation path...
Страница 21: ...21 Media loading path...
Страница 36: ...36 Update record Date Content Editor 2018 07 01 Release...