3nh NH310, Руководство по эксплуатации, Страница: 14 / 41

High-Quality Portable Colorimeter
12
Measurement or Other Operations
After completing sample measurement or other operations, the
instrument may display an interface. At this moment, press “Back”
button repeatedly until the interface back to “Standard Measurement”
interface, as shown in Figure 14. Then, perform standard measurement
according to step a).
3. Sample Measurement
After completing standard measurement, press “Enter” button, the
instrument will enter “Sample Measurement” interface automatically, as
shown in Figure 15. Align the measuring aperture to the test sample to
perform sample measurement.
Figure 15 Sample Measurement Interface
Note: During the measure ment (Approx. 1 sec ), all buttons are
ineffective.
（
III
）
Save Data
There are two methods to save data.
1. Auto Save
Press “MENU” button to enter the main menu, as shown in Figure 6.
Select “Settings” to enter an interface shown in Figure 16. Select “Auto
Save” to enter status setting interface, as shown in Figure 17. Select