3M X90 Скачать руководство пользователя | Manualshive

Страница: 57 / 70

background image

57

Maintenance

Lamp (continued)

WARNING

HIGH VOLTAGE

HIGH TEMPERATURE

HIGH PRESSURE

Ź

The projector uses a high-pressure mercury glass lamp. The lamp can break

with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn
over time. Note that each lamp has a different lifetime, and some may burst or
burn out soon after you start using them. In addition, when the bulb bursts, it is
possible for shards of glass

WRÀ\LQWRWKHODPSKRXVLQJDQGIRU

gas containing

mercury to escape from the projector’s vent holes.

Ź

About disposal of a lamp

• This product contains a mercury lamp; do not

put it in a trash. Dispose of it in accordance with environmental laws.
For lamp recycling, go to www.lamprecycle.org. (in the US)
For product disposal, contact your local government agency or www.eiae.org (in
the US) or www.epsc.ca (in Canada).
For more information, call your dealer.

• If the lamp should break (it will make a loud bang when it does), unplug
the power cord from the outlet, and make sure to request a replacement
lamp from your local dealer. Note that shards of glass could damage the
inside of the projector, or cause injury during handling, so please do not
try to clean the projector or replace the lamp yourself.
• If the lamp should break (it will make a loud bang when it does),
ventilate the room well, and make sure not to breathe the gas that
comes out of the projector vents, or get it in your eyes or mouth.
• Before replacing the lamp, turn the projector off and unplug the power
cord, then wait at least 45 minutes for the lamp to cool sufficiently.
Handling the lamp while hot can cause burns, as well as damaging the
lamp.

• Never unscrew except the appointed (marked by an arrow) screws.
• Do not open the lamp door while the projector is suspended from
the ceiling. This is dangerous, since if the lamp’s bulb has broken, the
shards will fall out when the cover is opened. In addition, working in
high places is dangerous, so ask your local dealer to have the lamp
replaced even if the bulb is not broken.
• Do not use the projector with the lamp door removed. To replace the
lamp, make sure that the screws are tightened firmly. Loose screws
could result in damage or injury.

•

8VHRQO\WKHODPSRIWKHVSHFL¿HGW\SH

• If the lamp breaks soon after the first time it is used, it is possible
that there are electrical problems elsewhere besides the lamp. If this
happens, contact your local dealer or a service representative.
• Handle with care: jolting or scratching could cause the lamp bulb to burst during use.
• Using the lamp for long periods of time could cause it dark, not to light
up or to burst. When the pictures appear dark, or when the color tone
is poor, please replace the lamp as soon as possible. Do not use old
(used) lamps; this is a cause of breakage.

Disconnect

the plug

from the

power

outlet

3M™ Digital Projector X90

© 3M 2007. All Rights Reserved.

«
...
55
56
57
58
59
...
»

Содержание X90







































































Отзывы:

Нет отзывов

Похожие инструкции для X90

Бренд: M-system Страницы: 4

Бренд: Paris Rhone Страницы: 260

AdvantageManual With CSR

Бренд: Da-Lite Страницы: 8

Бренд: Tripp Lite Страницы: 3

Бренд: M-system Страницы: 2

Бренд: promethean Страницы: 64

Бренд: Dukane Страницы: 106

Бренд: Hitachi Страницы: 18

Бренд: Hitachi Страницы: 27

Бренд: Hitachi Страницы: 2

Бренд: Hitachi Страницы: 2

Бренд: Hitachi Страницы: 2

Бренд: Hitachi Страницы: 2

Бренд: Hitachi Страницы: 67

Бренд: Hitachi Страницы: 22

Бренд: Hitachi Страницы: 31

Бренд: Hitachi Страницы: 20

Бренд: Hitachi Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды