background image

1

X90

Multimedia Projector
Operator's Guide

Thank you for purchasing this projector.

WARNING

Ź

Before using this product, please read the "Product Safety 

Guide" and related manuals to ensure the proper use of this product. After 
reading them, store them in a safe place for future reference.

About this manual

Various symbols are used in this manual. The meanings of these symbols are 
described below. 

WARNING

This symbol indicates information that, if ignored, could possibly 
result in personal injury or even death due to incorrect handling.

CAUTION

This symbol indicates information that, if ignored, could possibly 
result in personal injury or physical damage due to incorrect 
handling.

 

Please refer to the pages written following this symbol.

NOTE

  • The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transfer or copy of all or any part of this document is not permitted 

without express written consent.

Trademark acknowledgment

• Mac is registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• 

 is a trademark of SRS Labs, Inc.

• WOW technology is incorporated under license from SRS Labs, Inc.

All other trademarks are the properties of their respective owners.

© 3M 2007.  All Rights Reserved.

Содержание X90







































































Отзывы: