3M™ Digital Projector X76 Product Safety Guide
© 3M 2008. All rights reserved.
13
ENGLISH
Installing the batteries
Please load the batteries before using the remote control. If the remote control starts to malfunction, replace
the batteries. If you will not use the remote control for an extended period, remove the batteries from the
remote control and store them in a safe place.
1. Slide back and remove the battery cover in the
direction of the arrow.
2. Align and insert the two AA batteries (HITACHI
MAXELL Part No.LR6 or R6P) according to
their plus and minus terminals as indicated in the
remote control.
3. Replace the battery cover in the direction of the
arrow and snap it back into place.
Remote control
WARNING
CAUTION
7RUHGXFHWKHULVNDVVRFLDWHGZLWKFKRNLQJ
-
Keep the battery away from children and pets.
7RUHGXFHWKHULVNDVVRFLDWHGZLWKHQYLURQPHQWDOFRQWDPLQDWLRQ
-
Dispose of exhausted batteries in accordance with applicable federal, state, and
local regulations.
7RUHGXFHWKHULVNDVVRFLDWHGZLWKH[SORVLRQDQGRUFKHPLFDOVIURPDOHDNLQJ
batteries:
-
Use only with battery type AA (HITACHI MAXELL Part No.LR6 or R6P).
-
Orient the battery's plus (+) and minus (-) terminals of the batteries according to
the markings found on the remote control or internal clock battery case.
- Do not leave the battery in the remote for an extended period of time.
'RQRWKHDWGLVDVVHPEOHVKRUWUHFKDUJHRUH[SRVHWR¿UHRUKLJKWHPSHUDWXUH
- Do not carry batteries loose in your pocket or purse.
- Avoid eye and skin contact in the event that battery would leak.
- Do not mix used and new batteries.
-
Obey the local laws on disposing the battery.
