TR-600 Series Quick Start
Guide
Page 2 of 2
! WARNING
Properly selected, used, and maintained respirators help protect against certain airborne contaminants by reducing
concentrations in the wear’s breathing zone below the Occupational Exposure Limit (OEL). It is essential to follow all
instructions and government regulations on the use of this product, including wearing the complete respirator system
during all times of exposure, in order for the product to help protect the wearer.
Misuse of respirators may result in
overexposure to contaminants and lead to sickness or death.
For proper use, see supervisor, refer to the product
User
Instructions
or contact 3M Technical Service at 1-800-243-4630 in the U.S.A. and at 1-800-267-4414 in Canada.
The following are excerpts from the TR-600 User Instructions. Most user interfaces (e.g. latches) are colored blue.
3M Personal Safety Division
3M Center, Building 235-2W-70
St. Paul, MN 55144-1000
3M™ and Versaflo™ are registered trademarks of the 3M Company, and used u
nder license by 3M Canada.
Push ‘Test’ button to confirm
battery charge – 5 bars = 80-100%.
Attach battery pack to motor/blower. Gently tug battery
pack to confirm a secure connection.
Attach filter/cartridge (with filter cover), and belt to
motor/blower. Gently tug filter/cartridge to confirm a
secure connection.
Turn on PAPR.
Confirm LEDs flash on startup.
Confirm audible and vibratory alarms sound.
Confirm airflow is sufficient. Bottom of the ball
above airflow indicator zone flow level.
Insert breathing tube into PAPR outlet.
Inspect headtop for damage.
Connect breathing tube to headtop.
Don PAPR.
