3M Static Monitor 790 Скачать руководство пользователя страница 18

Страница: 18 / 19

Electronics Materials Solutions Division

Static Control Products

926 JR Industrial Drive

Sanford, NC 27332-9733

Toll-Free: 866-722-3736

International: 919-718-0000

Email: [email protected]

www.3Mstatic.com

Please recycle. Printed in USA.

78-9102-1492-9 JHA

Important Notice

All statements, technical information, and recommendations related to 3M’s products

are based on information believed to be reliable, but the accuracy or completeness is

not guaranteed. Before using this product, you must evaluate it and determine if it is

suitable for your intended application. You assume all risks and liability associated with

such use. Any statements related to the product which are not contained in 3M’s current

publications, or any contrary statements contained on your purchase order shall have no

force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for one year from

the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT

NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within

the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to

replace or repair the 3M product or refund the purchase price of the 3M product. Except

where prohibited by law, 3M will not be liable for any indirect, special, incidental or

consequential loss or damage arising from this 3M product, regardless of the legal

theory asserted.

UL Listed to U.S. and Canadian Safety Standards.
Mark of Conformity to European Directives (Conformité Européene).

3M is a trademark of 3M Company. Other trademarks used herein are the properties of their respective
owners.

Содержание Static Monitor 790




















Результаты поиска

Содержание Static Monitor 790

Отзывы:

Похожие инструкции для Static Monitor 790

Бренды по названию

Популярные бренды

3M Static Monitor 790, Руководство пользователя

Результаты поиска

Содержание Static Monitor 790

Отзывы:

Похожие инструкции для Static Monitor 790

Бренды по названию

Популярные бренды