4
Safety information for the V-Series Tabletop Models 6412, 6422,
7412, and 7422
!
WARNING
To reduce the risk associated with fire due to a user or installer attempting to service the SelfCheck
unit:
•
Do not attempt to modify or repair — no user serviceable parts — contact 3M Service for repair;
•
Use approved replacement components, installed by 3M Service personnel only.
To reduce the risk associated with hazardous voltage due to a user or installer attempting to service
the SelfCheck unit or use of the system when damage has occurred to power cord:
•
Do not attempt to modify or repair — no user serviceable parts — contact 3M Service for repair;
•
Use approved replacement components, installed by 3M Service personnel only;
•
Do not use the SelfCheck Tabletop unit if the power cord is damaged — contact 3M Service for
repair.
To reduce the risk associated with tipping over of the Selfcheck Tabletop unit due to placement on
an unsuitable desk or table:
•
Insure that the furniture onto which the Selfcheck is placed is strong enough and provides a low slip
surface to safely hold the unit to prevent tipping or falling;
•
Install SelfCheck in accordance with instructions and specifications given in the SelfCheck Tabletop
Site Planning Guide.
To reduce the risk associated with back strain due to the heavy weight of the system:
•
Follow safe lifting procedures.
!
CAUTION
To reduce the risk associated with environmental contamination due to the incorrect disposal of the
lithium battery in PC or mercury in monitor/display:
•
At the end of service life, dispose of Selfcheck unit and any accessories in accordance with federal,
state and local requirements.
To reduce the risk associated with exposure to laser light due to a person looking into the laser
scanner, or incorrect disposal of the laser scanner:
•
Do not look directly into laser scanner device;
•
At the end of service life, dispose of laser scanner in accordance with federal, state and local
requirements.
IMPORTANT NOTE
The Code of Federal Regulations (CFR) 21CFR1040.10 requires the following statement for
products containing lasers:
Caution—use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous laser light exposure.
