6
Safety information for the BCS Model 9410
!
WARNING
To reduce the risk associated with fire due to modification or incorrect
installation of system components or the use of non-approved replacement
components:
Do not attempt to modify or repair—no user serviceable parts—contact 3M Service
for repair.
Use approved system components installed by 3M service personnel only.
Install system components according to instructions and specifications given in the
Model 9410 Site Planning Guide.
To reduce the risk associated with hazardous voltage due to a user attempting
to service a component, incorrect installation of system components, or use of
the system when damage has occurred:
Do not attempt to modify or repair—no user serviceable parts—contact 3M
Service for repair.
Install system components according to instructions and specifications given in the
Model 9410 Site Planning Guide.
Do not use the computer or monitor if any enclosures or power cords are
damaged.
!
CAUTION
To reduce the risk associated with environmental contamination due to the
incorrect disposal of the lithium battery in PC, mercury in monitor/display,
and/or any circuitry that contains lead in the solder:
At the end of service life, dispose of the computer, monitor, printer, and laser
scanner in accordance with federal, state and local requirements.
To reduce the risk associated with exposure to laser light due to a person
looking into the laser scanner:
Do not look directly into laser scanner device.
At the end of service life, dispose of laser scanner in accordance with federal,
state, and local requirements.
IMPORTANT NOTE
The Code of Federal Regulations (CFR) 21CFR1040.10 requires the following
statement for products containing lasers:
Caution—use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous laser light exposure.
