36
© 3M 2008. All Rights Reserved.
User Controls
3M™ Super Close Projection System
•
“Frequency”,
“Phase”, “H
Position” and “V
Position” functions
are only supported
under Computer
mode.
Sharpness
Adjust the sharpness of the image.
Press the to decrease the sharpness.
Press the to increase the sharpness.
Frequency
“Frequency” changes the display data frequency to match the
frequency of your computer’s graphic card. If you experience a
vertical flickering bar, use this function to make an adjustment.
Phase
Change the display data frequency to match the frequency of your
computer’s graphic card. When you experience a vertical flickering
bar, use this function to make an adjustment.
H Position (Horizontal Position)
Press the to move the image left.
Press the to move the image right.
V Position (Vertical Position)
Press the to move the image down.
Press the to move the image up.
